Configuring Traversal Server Ports; Overview - TANDBERG VCS Administrator's Manual

Grey Headline (continued)
Configuring the VCS as a Traversal Server

Overview

The VCS Expressway has specific listening
ports used for firewall traversal. Rules must
be set on your firewall to allow connections to
these ports. In most cases the default ports
should be used. However, you have the option
to change these ports if necessary.
To configure the VCS Expressway ports:
•
VCS Configuration > Expressway > Ports
You will be taken to the Ports page.
•
xConfiguration Traversal Server
Media Demultiplexing
•
xConfiguration Traversal Server
H.323
Overview and
Introduction Getting Started
Status
D14049.04
JULY 2008

Configuring Traversal Server Ports

System VCS Zones and
Configuration Configuration Neighbors
Call Bandwidth
Processing Control
161
TANDBERG VIDEO COMMUNICATIONS SERVER
Media demultiplexing RTP port
Specifies the port on the VCS to be used for
demultiplexing RTP media.
Media demultiplexing RTCP port
Specifies the port on the VCS to be used for
demultiplexing RTCP media.
H.323 Assent call signaling port
Specifies the port on the VCS to be used for
Assent signaling.
H.323 H.460.18 call signaling port
Specifies the port on the VCS to be used for
H.460.18 signaling.
Save
Click here to save your settings.
Firewall
Applications Maintenance
Traversal
ADMINISTRATOR GUIDE
Appendices