Chapter 27: Port-Based Authentication Commands - Allied Telesis AT-GS900M Series User Manual

Chapter 27
Port-Based Authentication Commands
"ADD PORTAUTH PORT
SUPPLICANTMAC" on
page 499
"DELETE PORTAUTH PORT
SUPPLICANTMAC" on
page 501
"DISABLE PORTAUTH" on
page 502
"DISABLE PORTAUTH PORT
LOGTYPE" on page 503
"DISABLE WEBAUTHSERVER"
on page 505
"ENABLE PORTAUTH" on
page 506
"ENABLE PORTAUTH PORT
LOGTYPE" on page 507
"ENABLE WEBAUTHSERVER"
on page 509
"SET PORTAUTH
AUTHMETHOD" on page 510
"SET PORTAUTH
CSIDFORMAT" on page 511
"SET PORTAUTH
DHCPSERVER" on page 513
"SET PORTAUTH PORT
(Authenticator Port for All
Methods)" on page 514
Section IV: Security and Traffic Control
The Port-Based Authentication commands are summarized in Table 56.
Table 56. Port-Based Authentication Commands
Command
AT-GS900M Series CLI Reference
Description
Adds the MAC address of the supplicant
that communicates through the supplicant
port.
Deletes the MAC address of the
supplicant specified on the port.
Disables Port-based Authentication on the
switch.
Disables logging on the specified
authentication option and port.
Disables the Web-based Authentication
function.
Enables Port-based Authentication on the
switch.
Enables logging on the specified
authentication option and port.
Enables the Web-based Authentication
function.
Specifies the authentication protocol to
RADIUS EAP.
Specifies the MAC address format for
RADIUS packets.
Enables or disables the DHCP server
function for Authentication and specify the
lease time of an IP address.
Changes the authenticator settings for all
authentication methods including 802.1x
Port-based, MAC address-based, and
Web-based authentication on the
specified port.
497