Setting Up Print Service Settings - imagistics cm4530 Network Administrator's Manual

Setting up Print Service Settings

In the Print Service submenu page in the Setup menu, an administrator can configure such print
services as Raw TCP Print, LPD Print, IPP Print, FTP Print, NetWare Print, and Email Print.
Setting the Print Service settings
Network Administrator's Guide — Setting up Print Service Settings
1.
Access Imagistics Printer Utility in the administrator mode.
P.15 "Accessing Imagistics Printer Utility Administrator Mode"
2.
Click the Setup menu and Print Service submenu.
• The Scan to Print Service submenu page is displayed.
3.
In the Print Service submenu page, set the Print Service set-
tings as required.
• In the Print Service submenu page, you can set the following:
P.86 "Setting up the Raw TCP Print"
P.86 "Setting up the LPD Print"
P.87 "Setting up the IPP Print"
P.87 "Setting up the FTP Print"
P.88 "Setting up the NetWare Print"
P.88 "Setting up the Email Print"
4.
Click [Save].
• The confirmation dialog box appears.
85