Setting Up The Equipment As An Ndps Object - imagistics cm4530 Network Administrator's Manual

•
Install NDPS in the NetWare servers. NDPS comes with NetWare 5, but it is not installed auto-
matically. The NDPS install program extends the NDS schema for three NDS objects:
•
•
•
To load the Imagistics NDPS gateway on NW4, besides loading CLIBAUX.NLM, you need to
have the Novell new localization conversion tables installed in SYS:\SYSTEM. You can find
these files from latest Support pack 8a for NetWare 4.11 or 4.2. After you extract the support
pack compressed file, you must copy the UNI*.NLM files and LOCNLM32.NLM to SYS:\SYS-
TEM directory on the server.
Installing the Imagistics NDPS Gateway

— Setting up the equipment as an NDPS Object

This equipment should be automatically discovered by the Imagistics NDPS Gateway. If not,
manually create a new NDPS Printer Agent. (
Prerequisites
174
The Imagistics NDPS Gateway supports network configurations that are based on both a
server and the Windows operating system.
Prerequisites
NDPS Manager
NDPS Broker
NDPS Printer Agent
1.
Insert the Admin's Client CD-ROM into the CD-ROM drive on
the administrative workstation.
2.
Copy "tndps.exe", the self extracting executable file from the
CD-ROM to the workstation. Double-click the file to launch
the InstallShield setup program.
3.
Follow the Setup Wizard's prompt to supply the server vol-
ume or Browse to select a mapped drive.
4.
Click [Next] to proceed with installation. When the NDPS
Gateway and NetWare snap-in components have been
installed, you can configure the equipment as an NDPS
object.
Considerations and Limitations
1.
Load "NWADMN32.EXE" on the administrator workstation to
launch the NetWare administration program.
2.
Determine the Tree or Context under which to install the
NDPS printer agent.
3.
Verify that both a NDPS Manager and Broker object exist at
this level. If not, create them.
Network Administrator's Guide — Setting up NetWare Print Server
P.175 "Create a Printer Agent")