Setup Flow For Offramp Gateway - imagistics cm4530 Network Administrator's Manual

Setup Procedure
Step 1: Setting up the DNS server and SMTP server.
Step 2: Setting up the TCP/IP and the HTTP Network Service to enable Imagis-
Step 3: Setting up the SMTP Network Service.
Step 4: Setting the Internet Fax Settings.
Step 5: Setting up the Fax Settings.
Step 6: Registering the Relay Box with Email addresses.

Setup Flow for Offramp Gateway

•
NOTE:
This equipment can be used as a Hub Station to forward Emails — from your client computer or
Internet Fax device — to any facsimile on the public switched telephone network.
For example, the document can be sent to this equipment from out of the country through the
Internet, then the document can be sent from this equipment to the designated fax number
through the local public telephone line.
Network Administrator's Guide — Setup Flow for Fax Features
When this equipment uses the SMTP server to send an Email, you must configure the DNS
server and SMTP server in your network.
P.178 "Setting up DNS and Mail Servers"
tics Printer Utility.
You should set the TCP/IP and HTTP Network Service from the Touch Panel Display the
first time you use it, to make Imagistics Printer Utility available. Please see the User Func-
tions Guide to configure the TCP/IP and HTTP Network Service from the Touch Panel Dis-
play, or from Imagistics Printer Utility.
P.51 "Setting up the TCP/IP"
P.56 "Setting up the HTTP Network Service"
You should specify the SMTP server to be used for sending an Internet Fax.
P.57 "Setting up the SMTP Client"
In the Email Settings, you should specify the from address and from name to enable the
Internet Fax transmission. Also you can specify the fragment size, and body text that apply
to the Internet Faxes sent from this equipment.
P.79 "Setting up the Internet Fax Settings"
Set the Fax device settings to enable the facsimile transmission from this equipment. This is
available only when the optional Fax unit is installed. Please see the User Functions Guide
to configure the Fax Settings from the Touch Panel Display, or from Imagistics Printer Util-
ity.
P.67 "Setting up the Fax Settings"
The registration of the Relay Box can be done by users. Please see the Operator's Manual
for Facsimile Function to register the relay boxes from the Touch Panel Display, or see the
Network Operator's Guide to register the relay boxes from Imagistics Printer Utility.
The Offramp Gateway feature is available only when the optional Fax unit is installed.
39