Setting Up Internet Fax Settings - imagistics cm4530 Network Administrator's Manual

Setting up Internet Fax Settings

In the Internet Fax submenu page in the Setup menu, an administrator can configure the Internet
Fax settings needed for Internet Fax transmissions.
•
NOTE:
Setting the Internet Fax settings
•
SUPPLEMENT:
78
Some settings may not apply to the Touch Panel Display as soon as you save the
settings. When you change the settings, press the [RESET] button on the Control
Panel before an operation.
1.
Access Imagistics Printer Utility in the administrator mode.
P.15 "Accessing Imagistics Printer Utility Administrator Mode"
2.
Click the Setup menu and Internet Fax submenu.
• The Internet Fax submenu page is displayed.
3.
In the Internet Fax submenu page, set the Internet Fax set-
tings as required.
• To set the Internet Fax Settings, see the following:
P.79 "Setting up the Internet Fax Settings"
4.
Click [Save].
• The confirmation dialog box appears.
If you want to restore the current settings without saving the changes, click [Cancel].
Clicking [Cancel] cannot restore the defaults. This can only clear the changes and
restore the current settings before saving the changes.
Network Administrator's Guide — Setting up Internet Fax Settings