Setting Up Device Settings - imagistics cm4530 Network Administrator's Manual

Setting up Device Settings

In the General submenu page in the Setup menu, an administrator can configure the general set-
tings such as Device Information, Energy Save, Date and Time, and Web General Setting.
•
NOTE:
Setting the device settings
46
Some settings may not apply to the Touch Panel Display as soon as you save the
settings. When you change the settings, press the [RESET] button on the Control
Panel before an operation.
1.
Access Imagistics Printer Utility in the administrator mode.
P.15 "Accessing Imagistics Printer Utility Administrator Mode"
2.
Click the Setup menu and General submenu.
• The General submenu page is displayed.
3.
In the General submenu page, set the device settings as
required.
• In the General submenu page, you can set the following:
P.47 "Setting up the Device Information"
P.48 "Setting up the Energy Save"
P.48 "Setting up the Time and Date"
P.49 "Setting up the Web General Setting"
4.
Click [Save].
• The confirmation dialog box appears.
Network Administrator's Guide — Setting up Device Settings