Setting Up Email Settings - imagistics cm4530 Network Administrator's Manual

Setting up Email Settings

In the Email submenu page in the Setup menu, an administrator can configure the Email settings
that are needed for Scan to Email operations.
•
NOTE:
Setting the Email settings
•
SUPPLEMENT:
76
Some settings may not apply to the Touch Panel Display as soon as you save the
settings. When you change the settings, press the [RESET] button on the Control
Panel before an operation.
1.
Access Imagistics Printer Utility in the administrator mode.
P.15 "Accessing Imagistics Printer Utility Administrator Mode"
2.
Click the Setup menu and Email submenu.
• The Email submenu page is displayed.
3.
In the Email submenu page, set the Email settings as
required.
• To set the Email settings, see the following:
P.77 "Setting up the Email Settings"
4.
Click [Save].
• The confirmation dialog box appears.
If you want to restore the current settings without saving the changes, click [Cancel].
Clicking [Cancel] cannot restore the defaults. This can only clear the changes and
restore the current settings before saving the changes.
Network Administrator's Guide — Setting up Email Settings