Setting Up Save As File Settings; Local Storage Path - imagistics cm4530 Network Administrator's Manual

Setting up Save as file Settings

In the Save as file submenu page in the Setup menu, an administrator can configure the Send to
File settings that apply to the Save as file operations. An administrator also configures the Send
to File settings that apply to the Save as file operation using the N/W-Fax driver.
•
NOTE:
Setting the Save as file settings
Network Administrator's Guide — Setting up Save as file Settings
Some settings may not apply to the Touch Panel Display as soon as you save the
settings. When you change the settings, press the [RESET] button on the Control
Panel before an operation.
1.
Access Imagistics Printer Utility in the administrator mode.
P.15 "Accessing Imagistics Printer Utility Administrator Mode"
2.
Click the Setup menu and Save as file submenu.
• The Save as file submenu page is displayed.
3.
In the Save as file submenu page, set the Send to File set-
tings as required.
• In the Save as file submenu page, you can set the following:
P.72 "Setting up the Local Storage Path"
P.72 "Setting up the Storage Maintenance"
P.73 "Setting up the Destination"
P.73 "Setting up the Remote 1 and Remote 2"
P.74 "Setting up the N/W-Fax Destination"
P.75 "Setting up the N/W-Fax Folder"
4.
Click [Save].
• The confirmation dialog box appears.
71