Setup Flow For Printing Via Windows Print Server - imagistics cm4530 Network Administrator's Manual

•
NOTE:

Setup Flow for Printing via Windows Print Server

When you want to manage all print jobs in the print server instead of directly printing to this
equipment, the Windows Client Server network solution is helpful. In this case, an administrator
sets up the sharing printer using LPR in Windows NT 4.0, Windows 2000, Windows XP, or Win-
dows Server 2003 print server. Then clients can install the printer driver from the Windows print
server using SMB.
Setup procedure
Step 1: Setting up this equipment for LPR printing.
•
NOTE:
Step 2: Setting up the Windows print server.
26
Document Monitor is available only when the client computers are connected to this
equipment within the same local area network. Also Document Monitor cannot
automatically find the IP or IPX address of this equipment to connect, if users install
the client software for IPP printing. In that case, users must find the equipment in
the network using the Network Discovery feature. For more information about Doc-
ument Monitor, see the Printing Guide.
Connecting to Client Server type of Microsoft network
Setting up
the LPR connection
Windows 98
Windows Me
Windows NT 4.0
Windows 2000
Windows XP
Windows Server 2003
Please see the setup flow for LPR printing.
P.22 "Setup Flow for LPR Printing"
When installing the printer driver in the server to set up the sharing printer, install the
printer driver by the Add Printer Wizard. Do not install the printer driver using the
installer.
P.163 "Setting up Windows Print Server"
Network Administrator's Guide — Setup Flow for Printing Features
Windows NT 4.0
Windows 2000
Windows XP
Windows Server 2003
Setting up the SMB
printer connection