Setting Up The Dns Session; Setting Up The Ddns Session; Setting Up The Slp Session - imagistics cm4530 Network Administrator's Manual

Setting up the DNS Session

In DNS Session, you can specify the DNS server to enable the FQDN rather than the IP address
on specifying each server address such as SMTP server, POP3 server, and LDAP server.
•
SUPPLEMENT:
1
2
3

Setting up the DDNS Session

In DDNS Session, you can enable the Dynamic DNS service if the DNS server supports the
dynamic DNS.
1
2
3

Setting up the SLP Session

In SLP Session, you can enable or disable the SLP (Service Location Protocol) over TCP/IP
environments.
1
54
When the DNS service is enabled and the DNS server supports the dynamic DNS
service, please set the DDNS Session as well.
P.54 "Setting up the DDNS Session"
1) Enable DNS
Select whether the DNS server is used or not.
2) Primary DNS Server Address
Specify the IP address of the primary DNS server when the DNS service is enabled.
3) Secondary DNS Server Address
Specify the IP address of the secondary DNS server when the DNS service is enabled, as you
require.
1) Enable DDNS
Select whether the dynamic DNS service is enabled or disabled.
2) Host Name
Enter the host name that will be added to the DNS server using DDNS.
3) Domain Name
Enter the domain name that will be added to the DNS server using DDNS.
1) Enable SLP
Select whether the SLP is enabled or disabled. Please enable this when you configure a
Novell printing environment using the NetWare server over the TCP/IP network.
Network Administrator's Guide — Setting up Network Settings