10. Configuring Event Settings; Configuring Motion Detection Settings - Honeywell HRHT4041 User Manual

10. Configuring Event Settings

This chapter contains the following sections:
• Configuring Motion Detection Settings, page 85
Configuring Video Loss Settings, page 89
•
• Configuring Tampering Settings, page 90
• Configuring Diagnosis Settings, page 91
• Configuring Face Detection Settings, page 93
Configuring Alarms, page 95
•
• Configuring Abnormality Settings, page 97
Configuring Temperature and Humidity Camera
•

Configuring Motion Detection Settings

To set up motion detection regions
1. Go to Main Menu  Setting  Event  Video Detect  Motion Detect.
Figure 10-1
2. On the Motion Detect tab, in the Channel box, select the channel (camera) that you want
to configure motion detection settings for.
3. Select the Enable check box to enable motion detection for the selected channel.
Configuring Event Settings
（ ）
IOT , page 101
85