Bus; General; Aux (Mono); Aux (Stereo) - SoundCraft VI6 User Manual

BUS

Figure 4-12: The Bus Page.

General

The first Bus page contains the controls for busses 1-16, while the second page contains the controls for
busses 17-32.
What these fields look like depends on the Bus configuration.

AUX (Mono)

Encoder adjusts the send level to this BUS. Pre indicates the PRE/post state. {ON} enables the send.

AUX (Stereo)

Left Encoder adjusts the send level to both busses, while the right encoder adjusts the pan to these
busses.
HINT: If the channel is paired, the right encoder adjusts the Balance to the Busses. If the 'follow channel
pan' option was activated in the bus configuration, there will be no function on the right encoder.
PRE indicates the pre/post state. {ON} enables the send.

GRP (Mono)

{ON} routes the signal to this bus.

GRP (Stereo)

{ON} route the signals to both busses.

Empty

If a bus has been configured as a Matrix, it is not visible in this page.
Page 4 - 14 Soundcraft Vi6™ User Guide