Monitoring; Signal Flow; Function - SoundCraft VI6 User Manual

SIGNAL FLOW

Figure 11-1: Monitor Block Diagram.

FUNCTION

The Monitoring section in the Soundcraft VI6™ has three individual monitoring outputs:
Monitor A
Monitor B
Headphones
For each monitoring output, the following parameters can be set or configured:
Source
Input SOLO
Output SOLO (with user configurable OUT SOLO Group)
TB from external
Audio Format (swapping or mono-ing Left or Right channels).
Two alternative monitoring sources, USER A and USER B, can be freely assigned and labelled. These can
be used for a favourite monitor mix, or a 'shout' talkback feed.
Soundcraft Vi6™ User Guide
3 channel (LCR) format (it can be used as stereo by ignoring C)
Stereo format
Stereo format.

MONITORING

Page 11 - 1