Input Priority Mode - SoundCraft VI6 User Manual

Input Priority Mode

When I/P Priority is enabled, via the Input Priority key (see Figure 11-10), it allows an Output Solo to
remain active, whilst an Input Solo is temporarily activated 'over the top' of it. When the Input Solo is
activated, its audio replaces the Output Solo audio on the Solo Bus, although the Output's Solo/Sel
switch remains illuminated. When the Input Solo is deactivated, the Output Solo's audio will return to the
Solo Bus.
HINT: Input Priority mode is normally used by Monitor engineers, who tend to work with an Output Solo
always active, but occasionally need to solo an input to troubleshoot a problem. The Input Priority mode
ensures that they automatically return to the Output Solo they were listening to, after the Input Solo is
deactivated.
Figure 11-10: INPUT PRIORITY Key
Soundcraft Vi6™ User Guide Page 11 - 13