SoundCraft VI6 User Manual page 176

. Press [PASTE]
. Select the destination FX unit by touching the required FX Select Encoder (or adjacent button)
in the central screen.
or
touching any touch field on the target channel or bus strip.
or
pressing [SOLO/SEL] on the target channel or bus
The FX unit settings on the clipboard are immediately copied to the destination FX unit.
. The operation can be undone by pressing [UNDO], before exiting Paste mode.
. End the function by pressing [PASTE] again.
Page 18 - 6 Soundcraft Vi6™ User Guide