Gpio; Configuration - SoundCraft VI6 User Manual

GPIO

CONFIGURATION

In the GPIO (General Purpose Input Output) Page you can configure all GPIO channels that are available in
the Soundcraft VI6™. To access the GPIO page, press the [MENU] key, this opens the Main menu page on
the master section screen, then touch the <GPIO> tab (see also chapter 14).
Figure 16-1: GPIO Page.
The scrollable tables show the configuration of the GPIO channels. The configuration is done via the VST
fields. The selections made via the VST keys and encoders are reflected in the tables on the screen. For
each GPIO channel, the polarity, time (outputs only) and edge can be configured, to make it easy to
interface directly to different device types.
Screen Touch-Pads
<LOCAL RACK>
Selects the GPIO in the Local Rack (16 GPIO channels).
<STAGE BOX>
Selects the GPIO in the Stage Box (8 GPIO).
Up and Down Arrows
The pair of Up and Down Arrows are used to scroll though the two lists. The currently-selected input and
output channels are outlined in yellow. GP Inputs are displayed in blue, and GP Outputs are displayed in
red.
Soundcraft Vi6™ User Guide Page 16 - 1