SoundCraft VI6 User Manual page 61

THRS Field
Encoder adjusts the threshold value between -40 db to +18db.
{IN} enables the GATE.
ATCK field
Encoder adjusts the attack time in the range 10µS to 957mS.
{INV} sets the GATE to inverse mode (ducking mode).
HLD field
Encoder adjusts the hold time in the range 2.2mS to 2S.
REL field
Encoder adjusts the release time in the range 2.2mS to 3.7S.
RNG field
Encoder adjusts the attenuation RNG value in the range 0 to -60dB.
{SC SOLO} switches the side-chain signal to the solo bus.
LO CUT
Encoder adjusts the frequency of the side-chain signal Lo Cut filter.
{IN} enables the Low cut filter.
HI CUT
Encoder adjusts the frequency of the side-chain signal Hi Cut filter.
{EXT Key} enables an external key signal, which is selected via the {KEY} key associated with the MODE
field below; otherwise the internal signal is used for triggering the gate.
MODE field
Encoder switches the operational mode between GATE or Deesser.
{Key} opens the key signal patch page -see chapter 10.
Soundcraft Vi6™ User Guide Page 4 - 11