Usb Data Storage Device - SoundCraft VI6 User Manual

title is shown in yellow text above the list).
The <REN> button allows the user to rename the show, the on-screen keyboard is displayed.
The<DEL> button deletes the show from the hard drive (note that the currently-loaded show
cannot be deleted). A confirmation dialogue is displayed.
Default Shows
The console comes with some factory-installed shows. These are not normally visible in the list, but they
can be seen by pressing the <SHOW DFLTs> button. The default Shows are at the top of the list and are
shown in italic text. They cannot be deleted with the <DEL> key, nor renamed.
Creating A New Show
The user can select a default show or another existing show and use the <SAVE AS> key. The user will then
be asked to enter a name for the new Show using the on-screen keyboard. This new show can then be
edited as required.
IMPORTANT: If you want to base your Show on one of the defaults, you MUST save it as a new
show before you start working, otherwise you will not be able to store Snapshots. This is be-
cause of the write-protection assigned to the default Shows.
Updating A Show (V1.5.1.47 and above)
A loaded show can be updated at any time by pressing the <SAVE> button.

USB Data Storage Device

The right-hand side of the page displays the shows which are present on the installed USB data storage
device. Normally the front panel USB Data Socket will be used (USB1), but it is possible to connect USB
data storage devices to the rear panel USB sockets (USB2 and USB3), and select the required device by
insing the <USB1><USB2><USB3> buttons. The up and down-arrows on the touch screen are used to
scroll though the available Show titles. Once the required show has been highlighted, in the double-height
yellow-outlined box, the two buttons on the left can be used as follows:
The <REN> button allows the user to rename the show, the on-screen keyboard is displayed.
The<DEL> button deletes the show from the USB data storage device.
Exporting A Show To A USB Data Storage Device.
Pressing the right-facing arrow will export the currently-selected Show to an installed USB data storage
device. Note that the date and time of the latest save is shown in both lists.
Importing A Show From A USB Data Storage Device.
Pressing the left-facing arrow will import the currently-selected Show from an installed USB data storage
device. Note that the date and time of the latest save is shown in both lists.
Soundcraft Vi6™ User Guide Page 15 - 5