Setting Or Changing The Bus Or Master Output Patch - SoundCraft Si Compact User Manual

Setting or Changing the Bus or Master Output Patch

The OUTPUT PATCH1(/PATCH2) screen shows the current bus output patch with an orange 'tick';
other outputs that are in use have a gray 'tick' whilst unused patches have no 'tick' (in this case
from bus name Lead Vocal which is bus 9 on the console to analogue output 9). To change to
another destination simply touch the icon or browse alternative destinations using the SCROLL/
ADJUST encoder or left/right (< >) arrows on the touch screen.
NOTE: The system will provide a warning if you attempt to use a patch that is already in use
allowing you to either continue or abort the action.
To have the system automatically patch multiple buses press the AUTO COMPETE button; this will
increment the input by 1 and patch by 1 until a logical group of patches is complete.
To leave the PATCH set-up press MENU, CUE LIST or LEX.
NOTE: The L & R buses will always patch as an odd/even pair.
NOTE: There are two patch destinations for all bus outputs, the patch being made will depend
upon which 'Patch' you selected to enter the patching pages, either Patch 01 or Patch 02.
52
Soundcraft Si Compact User Guide 1211