Settings Recorded Within Audio Settings; Settings Not Recorded - SoundCraft VI6 User Manual

Settings Recorded Within Audio Settings

This applies to the Show Snapshot and to any standard Snapshots.
All Channel audio settings on the console: Channel ON; Fader positions; Pan; Channel Parameters (EQ/
Dynamics/input/output/ insert).
All Channel Bus assigns, levels, Pre/Post states and Channel Labels.
All Channel Patch ordering.
All I/O routing.
All I/O controls.

Settings Not Recorded

PFL/SOLO switch status.
SEL Switch status.
LRC Sel switch status.
Metering values.
All round Setup switch status.
User Defined switches (O/P fdr pnl) status.
All switches in Snapshot Control section.
Power On switch status.
Copy/Paste/Undo switch status.
Set Pre/Post modes switch status.
Pan/Level toggle switch status.
Upper & Lower Encoder Row Assign switches status.
Gang Mode switch status.
Solo Clear switch status.
Mute Group Master switch status.
Soundcraft Vi6™ User Guide Page 15 - 7