Stereo Inserts - SoundCraft VI6 User Manual

Figure 10-7: Insert Setup Page.
Patching Insert Send Or Return Signals To The Connectors Or MADI Channels
* <SEND> opens the output patch page, where it is possible to define the physical connector for
the insert send.
* <RET> opens the input patch page, where it is possible to define the physical connector for the
insert return.
* <LABEL> opens the keyboard page, where it is possible to label the insert.
* Leave the page with <EXIT> or press the INSERT {VST config button} again.

Stereo Inserts

Stereo inserts can be configured odd/even wise with <LINK> from the even insert number.
The following table shows the valid Format combinations.
MONO
INSERT
STEREO
INSERT
Soundcraft Vi6™ User Guide
MONO CHANNEL
audio is feed to both insert
sends, returns are down mixed
PAIRED CHANNEL or
STEREO BUS
X
Page 10 - 7