Pan Function Lcr Mode - SoundCraft VI6 User Manual

PAN Function LCR Mode

If the Pan MODE is set to LCR an additional WIDTH field is displayed. (If the channel is paired, it is not
possible to set the PAN mode to LCR.)
Figure 4-14: The Panning Section In LCR Mode.
PAN Field
Displays the pan setting. Encoder sets the channel pan to the three masters. See Audio Format / Pan /
Panning on pages 4-17 & 4-18.
WIDTH Field
In LCR mode, the encoder adjusts the level of an additional amount of signal sent to both left and right
outputs.
MASTER LCR
{ON} routes the channel signal to the Left, Right and Centre masters.
Page 4 - 16 Soundcraft Vi6™ User Guide