Dly Field - SoundCraft VI6 User Manual

Source
USER A, USER B and (LR,C) are mutually exclusive, but LR and C can be mixed. Also 'NONE' can be
selected.
<LCR>
Sets the monitor A Source to LR.
<C>
Sets the Monitor A Source to C.
<USER A>
Sets the Monitor A Source to USER A.
<USER B>
Sets the monitor A Source to USER B.
Solo Switching
The following four fields apply to the MTR B and Headphones sections of the screen page
<IN SOLO>
Routes the Input SOLO Signals to the Monitor B/Headphones Output, according to which of the two
possible fields are selected.
<OUT SOLO>
Routes the Output SOLO from the Busses that are included in the OUT SOLO selection (see Figure 11-6)
to the Monitor B/Headphones Output, according to which of the two possible fields are selected.
<TB RET>
Routes the Talk Back Return Signal to the Monitor B/Headphones Output, according to which of the two
possible fields are selected.
<FLW A>
Selecting this option forces the source selection for Monitor B and/or Headphones to follow the selection
made for Monitor A. All the other options for Monitor B and/or Headphones are disabled when FLW A is
enabled.
Format Field
Selects the listening format.
The encoder selects one of the following options to be the listening format:
LR left source to left monitor, right source to right monitor
RL left source to right monitor, right source to left monitor
LL left source to left and right monitor
RR right source to left and right monitor
Mono left and right source is summed and fed to left and right monitor.

DLY Field

The encoder changes the monitoring delay in the range 0 - 2000 mS. {ON} enables the delay function.
This parameter applies to all three monitor circuits.
The monitor delay allows the headphones and/or monitor speakers to be time-aligned to the output from
the main PA system, when working at a distance from the PA speakers.
Soundcraft Vi6™ User Guide Page 11 - 7