Resetting Fast Access For The Answering Machine Using Key 1; Operating When On The Move (Remote Operation) - Gigaset C610A Manual

Operating the answering machine on the Gigaset C610A base
Ring Delay:
When the answering machine should
accept a call select: Immediately, 10 sec.,
18 sec., 30 sec. or Auto. The default is 18.
sec.
§Save§
Press the display key.
Information about call acceptance
In Auto mode, the following applies to ring
delay:
u
If there are no new messages, the answer-
ing machine accepts a call after 18 sec-
onds.
u
If new messages are present, the answer-
ing machine accepts a call after 10 sec-
onds.
When operating remotely (
the answering machine does not "pick up"
the call in approx. 15 seconds there are no
new messages (otherwise the answering
machine would already have accepted your
call). There are no call charges if you hang up
before the answering machine picks up.
Changing the language for voice
prompt and pre-recorded
announcement
v
Open the main menu.
*#Q5#2
Enter digits and press
Q
§OK§
To set English.
§OK§
To set French.
2
§OK§
To set Spanish.
42
¢
page 42) if
•
Resetting fast access for
the answering machine using
key 1
By default, key has been assigned for
fast access to the integrated answering
machine. However, if you have set the net-
work mailbox for fast access (
you can reset this setting.
¢ ¢
v Ì
Set Key 1
Answ. Machine
Select and press
After selecting the answering machine,
press and hold key . You will be con-
nected directly.
The setting for fast access applies to all regis-
tered handsets.
Operating when on the move
(remote operation)
You can check and activate your answering
machine from any other telephone (hotel,
pay phone etc.),.
Prerequisite:
u
You have set a system PIN other than
¢
0000 ( page 56).
u
The phone you are using for remote oper-
ation has tone dialing (DTMF), i.e. you
hear different tones when you press the
keys. Alternatively, you can use a code
transmitter (available from a retailer).
¢
page 44),
§OK§
.