Remote Operation When On The Move; Locating A Handset ("Paging"); Registering Handsets - Gigaset A490 Manual

Remote operation when on
the move
You can check and activate your answering
machine from any other telephone (hotel,
pay phone etc.).
Preconditions:
◆
¢
You have set a system PIN other than
0000 page 25.
◆
The phone you are using for remote
operation has touch tone dialling
(DTMF), i.e. you hear different tones
when you press the keys.
Calling the answering machine and
playing back messages
~
(Dial your own number)
to your announcement: press the
enter the system PIN
The following keys are used for operation:
A
Go to the start of the current mes-
sage.
Press twice to go back to the previous
message.
B
Stop playback. Press again to resume.
3
Skip to next message.
0
Delete current message.
Activating the answering machine
~
(Enter your own number and allow the
phone to ring until you hear the message:
"Please enter PIN")
Your answering machine is activated. It tells
you how much memory time is left. The
messages are now played back. The
answering machine cannot be deactivated
remotely.
¢
while listening
9
¢
~
enter system PIN
13
Locating a handset
("paging")
You can locate your handset using the base
station.
◆
Briefly press the registration/paging
key on the base station (
◆
All handsets will ring simultaneously
("paging"), even if the ringer tones are
deactivated.
End paging: briefly press the register/pag-
ing key on the base station (
the talk key

Registering handsets

You can register up to four handsets on
your base station (Gigaset A39H/A49H rec-
key and
ommended).
Each additional handset must be regis-
tered on the base station in order for it
to work properly!
Manual registration of handsets to
Gigaset A490/A495
1. On the base station:
¢
press and hold the registration/paging key
( page 1) for min. 3 sec.
2. On the handset:
within 60 sec. of pressing the registration/
paging key
¢
MENU
OK
¢
system PIN of the base station (default is 0000)
OK
Registering flashes in the display
Registration takes approx. 1 minute.
If you change the standard PIN 0000
please note that the new PIN must con-
sist of 4 digits!
c
on a handset.
Please note
¢ ¢
¢ ¢
Settings OK
Register HS
.
Please note
¢
page 1).
¢
page 1) or
¢
¢
Handset
OK Enter the
.