Table of Contents
Advertisement
2.
Press Staple Mode Selection button and/or Punch button to select
the desired mode.
Punch mode is compatible with 1 oblique staple, 2 parallel staples, or Stitch
& Fold mode.
3.
Press Start/Stop button.
Finished sheets will be delivered to the appropriate tray according to the
selected mode.
If you want to stop the Off-Line Finishing operation, press the Start/Stop
button again. The finisher will cease operating. When using Stitch & Fold
mode, the unfinished set will be left in the stacker unit inside the finisher.
When the Booklet tray capacity is exceeded, the finisher will cease
operating. To avoid this, select the appropriate print quantity from
the specifications on p. 8-9 and p. 8-15.
When the finisher exit tray capacity is exceeded due to the print
quantity selected, remove the copied sets as they exit; otherwise,
mishandled paper will occur.
Off-Line Finishing
8-25
Hide quick links:
Advertisement
Table of Contents
