Making Double-Sided Copies (1)2, 2)2)
Using Platen Glass
Use the platen glass to scan originals unsuitable for the document feeder.
Specification for Double-Sided Copying Using Platen Glass
/ Use the Platen store mode.
/ See p. 12-10 for the information on unsuitable RADF originals.
/ Incompatible Conditions: Face Up, Image Insert, Multi-Page Enlargement,
Storing Image in Overlay Memory
1.
Check and specify the original set direction and binding mode.
The Original direction icon is located at the upper left corner of the Basic
Screen.
To change the original set direction, touch SPECIAL ORIGINAL on the Basic
Screen to display the Special Original popup menu, then touch the desired
original direction key to highlight it.
If the originals are upside down on the reverse side and you want to make
copies of the same direction on both sides, touch TOP BIND.
With this feature specified, next step is not needed. Proceed to step 3.
Touch OK to return to the Basic Screen.
3-32