Table of Contents
Advertisement
[4] EKC (Electronic Key Counter) Function Setting
[3] E.K.C. Function Setting
Use this function to turn EKC On or Off and to select whether the copier will stop at
the time the count limit is reached, or after the current copy job is completed.
NOTE:
If EKC Off is selected on the machine with this function previously activated,
copying operation will become available without entering an EKC password,
while the counting function will be suspended.
EKC Setting Menu Screen
Procedure
1 Display the EKC Setting Menu Screen, referring to p. 14-14.
2 Touch [3] E.K.C. function setting. The EKC Function Setting Screen will be
displayed.
3 Touch EKC On to activate EKC or touch EKC Off to de-activate EKC.
The selected key will be highlighted.
4 Select the desired machine condition when the count limit is reached. The
selected key will be highlighted.
Touch Immediately to stop the machine at once when the copy limit is reached.
In this case, copy conditions selected for the current job will be cleared. To
continue the job using the same user password, change the copy limit of the
password or clear the copy count.
Touch After job to stop the machine after the current job is completed, when
copy limit is reached. Copying job will be unavailable with the message "Copy
limit reached" displayed on the screen.
Touch Warning only to display a warning message when copy limit is reached.
The message "Copy limit reached" will be displayed on the screen, while
copying job can be continued.
5 Touch OK to complete the setting and return to the EKC Setting Menu Screen, or
touch CANCEL to cancel.
6 Touch PREVIOUS SCREEN to restore the Key Operator Mode Screen.
EKC Function Setting Screen
14-19
Hide quick links:
Advertisement
Table of Contents
