[17] Front & Back Density Setting
Use this function to make fine adjustments to the copy density of the front and back
sides, as well as the output setting of CMYK colours.
Key Operator Mode Screen
Procedure
1 Touch [17] Front & Back Density setting to display the Front & Back Density
Setting 2nd trans Screen.
2 Touch the desired adjustment key to make an adjustment for each side.
3 To set the 1st transmission output setting of CMYK colours, touch NEXT
ADJUSTMENT and/or PREVIOUS ADJUSTMENT to display the Font & Back
Density Setting 1st Trans Screen.
4 Touch the desired adjustment key to highlight it.
5 Touch OK to complete the setting and restore the Key Operator Mode Screen, or
touch CANCEL to restore the previous setting.
[17] Front & Back Density Setting
Front&Back Density Setting Screen
14-49