Konica Minolta BIZHUB PRO C500 User Manual page 57

Be sure to fix the side guide plate in position according to the size indication
on the tray bottom plate so that the machine can detect the correct paper
size.
3. Adjust the position of the rear stopper.
To slide the rear stopper to the right, hold it at the upper part and slide it while
pressing down slightly.
On the other hand, hold the rear stopper at the lower part to slide it to the left.
1
Be sure to press down the rear stopper when moving it to the right, and also
be sure to hold it at the lower part when moving it to the left. Do not move the
rear stopper forcibly, otherwise it may be damaged.
4. Place paper on the tray.
Load paper aligning it to the right side of the tray, then align the rear stopper to
the paper.
• Be sure that the rear guide plate is securely aligned to the paper;
otherwise machine trouble may occur.
• Do not load above the limit indicated on the side guide plate.
2
Loading Paper
2-25