Table of Contents
Advertisement
Making Double-Sided Copies (1)2, 2)2)
4.
Touch 1)2 on the Basic Screen to highlight it.
The STORE key will be automatically highlighted on the screen.
DO NOT press [
be released to disable the copier from scanning the original placed on the
platen glass.
5.
Select additional copy conditions, as desired.
Some incompatible conditions may automatically release the selected copy
mode. In this case, arrange the settings so that they are compatible with the
selected copy mode.
6.
Enter the desired print quantity from the control panel keypad.
See p. 3-10 for details on setting print quantity.
7.
Press [START] to scan.
The front side image of the double-sided copy will be scanned into memory.
8.
Replace the original on the platen glass with the back side image
original, then press [START].
Repeat this step until all originals are scanned.
• Memory indicator on the upper right of the Basic Screen allows you to
check the remaining memory.
• To delete the scanned data without printing, press [
details.
9.
After all originals are scanned, touch STORE to exit the Store
mode.
STORE will no longer be highlighted.
10. Press [START] to print.
All the data in memory will be output.
3-34
AUTO RESET
] at this point, otherwise the platen mode will
STOP
]. See p. 3-15 for
Hide quick links:
Advertisement
Table of Contents
