Table of Contents
Advertisement
Overlaying an Image onto Each Page Copied in the Job
3.
Touch OVERLAY.
4.
Touch OK on the Stamp/Overlay Selection Screen.
The Application Selection Screen will be restored.
5.
Touch OK on the Application Selection Screen.
The Basic Screen will be restored.
The Store mode is automatically selected.
6.
Select the desired paper size and magnification on the Basic
Screen.
APS and AMS are automatically released, and 1.000 (100%) is selected as a
magnification ratio.
7.
Enter the desired print quantity from the control panel keypad.
See p. 3-10 for details on setting print quantity.
8.
Position the overlaying original.
Position the original FACE UP in the document feeder or FACE DOWN on the
platen glass.
For details on positioning originals, see p. 3-4.
9.
Press [START] to scan.
The original image will be scanned into memory.
10. Position the original(s) to be overlaid.
Position the original FACE UP in the document feeder or FACE DOWN on the
platen glass.
11. Press [START] to scan.
12. Repeat steps 10 and 11 for all originals.
13. Touch STORE to exit the Store mode, then press [START] to print.
10-68
Hide quick links:
Advertisement
Table of Contents
