Konica Minolta BIZHUB PRO C500 User Manual page 273

Making a Multiple Page Signature Booklet (Booklet)
If the copier is equipped with FS-606 Finisher, Fold or Stitch & Fold output
mode is available. Follow the procedure on p. 10-15 to use the function.
9. Enter the desired print quantity from the control panel keypad.
See p. 3-10 for details on setting print quantity.
10. Position originals FACE UP in the document feeder.
• For details on positioning originals, see p. 3-4.
• Use RADF store mode (p. 3-38) when the original count exceeds 100.
Original pages should be a multiple of 4 in 1-2 mode or a multiple of 2 in 2-2
mode; otherwise blank pages are automatically inserted to the last.
When loading originals, heed the following limits on capacity:
• Fold mode
12 pages or less for simplex copying
6 pages or less for duplex copying
• Stitch & Fold mode
80 pages or less for simplex copying
40 pages or less for duplex copying
Exceeding the above limits on capacity may cause misfeeds in the finisher.
11. Press [START].
When the finisher / paper exit tray capacity is exceeded due to the
print quantity selected, remove the copied sets as they exit;
otherwise, mishandled paper will occur.
When the Booklet / Trimmer unit tray capacity is exceeded, the
finisher / trimmer unit will cease operating. To avoid such trouble,
select an appropriate print quantity from the specifications on p. 12-
5.
The roller drive unit is located inside the Booklet tray of the finisher.
DO NOT put your hand into the roller drive unit when removing
folded or stapled & folded sheets; otherwise, you may be injured.
Selecting Fold / Stitch & Fold Mode
10-17