Konica Minolta BIZHUB PRO C500 User Manual page 262

Inserting Sheets and Covers (Sheet/Cover Insertion)
5. Touch CHANGE OF THE TRAY to select the cover sheet tray
source.
The tray source for covers currently selected is displayed on the Sheet/Cover
Insertion Screen.
Every touch of the key shifts the selection in the display that includes paper
type as specified in Key Operator mode.
If no insertion is desired, proceed to step 8.
6. When selecting Insertion mode:
Enter the page number.
Touch to select the desired insertion mode, then use the control panel keypad
to enter the page number of insertion location.
Touch SET after each entry to move to the next key.
To clear an incorrect entry, touch DELETE. The insertion location will be
deleted.
Entering Page Numbers
Fifteen keys are displayed on the screen to designate each insertion location.
When setting more than 15 locations, touch the arrow key to move to the
next page.
The first (upper left) key displays the Front Cover icon if selected. The Back
Cover icon appears, if selected, as the last (fixed) key, with one active blank
key preceding it.
Example: If p. 4 is entered in blank mode, a blank sheet will be inserted
between p. 4 and p. 5; in copy mode, a copied sheet is inserted at p. 4.
NOTES:
• The page numbers entered at random will be sorted automatically.
• Entering "0" or the same page number twice will be ignored on the screen.
• When a page number entered is larger than the total original page count, it
will be ignored.
7. Touch CHANGE OF THE TRAY to select the insertion tray source.
The tray source for covers currently selected is displayed on the Sheet/Cover
Insertion Screen.
Every touch of the key shifts the selection in the display that includes paper
type as specified in Key Operator mode.
10-6