Using The Hard Drive For Secure And Proof Jobs; Creating Secure Jobs - Xerox DocuPrint N2125 System Administrator Manual

Using the Hard Drive for Secure and Proof Jobs

Using the Hard Drive for Secure
and Proof Jobs

Creating Secure Jobs

3-8 System Administrator Guide
Secure, collated copy, and proof jobs that have been
submitted to the printer are stored in PCL or PostScript
format on the hard drive. These secure and proof jobs can
be printed (or deleted) through the Password Menu where
you enter the 4-digit password for the job or jobs to be
printed. Procedures for printing or deleting secure jobs are
listed in Table 1.8 on page 1-19.
The secure or proof job is placed at the top of the print
queue, and will print following completion of the
currently printing job. If more than one job is requested,
jobs are placed on the print queue in the order requested.
Secure or proof jobs having the same priority are printed
on a first in, first out basis.
Secure printing delays printing of a job until a password
associated with the job is entered at the printer's Control
Panel. Entering the password at the Control Panel will
provide access to only those jobs sent with that password.
Secure jobs are normally created in PCL and PostScript by
choosing the feature in a driver. When not using a driver,
secure jobs may be created by preceding the job with the
following PJL commands:
@PJL XSECUREJOB
@PJL XJOBPASSWORD = "number"
These commands must be immediately followed by a
standard PJL "JOB" command that includes the
"jobname."