Xerox DocuPrint N2125 System Administrator Manual page 43

Table 1.10 Tray Menu Functions (continued)
Menu Item and Function
Tray Sequence
Set the sequence of trays used by
the printer when tray switching is
required. The available values are:
MBF-1* 1-MBF
MBF-2 1-2
MBF-3 1-2-3
MBF-1-2 2-1
MBF-1-2-3 2-3
MBF-2-1** 3-1
MBF-2-3 3-1-2
MBF-3-1 Off
MBF-3-1-2***
Values in italics are available only with
optional tray(s) installed.
* the default if no optional feeders are
installed.
** the default if only optional Tray 2 is
installed.
*** the default if optional Trays 2 and 3
are installed.
The first tray of a sequence is
used until it runs out of paper, at
which time the next tray in the
sequence is used (if it has the
correct paper size and type).
See the section "Configuring
Automatic Tray Switching"
(page 1-114) for rules and
examples of usage.
Keystrokes
1. Press Menu Up or Menu Down
until you see:
2. Press Item Up or Item Down until
you see:
3. Press Value Up or Value Down until
you see:
4. Press Enter. You will see:
5. Press On Line. You will see:
Using the Menu System
Display Reads
Menu s
Tray Me nu
Tray Me nu
Tray Se que nce
Tray Se que nce
New Value
Tray Me nu
Tray Se que nce
Read y
Table 1.10 Page 4 of 11
Chapter 1: Configuring the Printer
=
1-27