Xerox DocuPrint N2125 System Administrator Manual page 180

Maintenance Kit Instructions
4-12 System Administrator Guide
3 Remove the laser print cartridge.
To prevent toner stains, place the cartridge on a
surface covered with scrap paper.
4 Press the orange levers down to raise the roller.
5 While holding both ends of the roller, pull it towards you
and lift it out.
Do not reach into the area behind the roller
where a printer component has a serrated
edge.
6 Hold the new roller at each end with the gear on the right.
Align the roller's ends with the right and left notches,
then gently press the roller into place, one side at a time.
Be careful not to touch the roller.