Xerox DocuPrint N2125 System Administrator Manual page 65

Table 1.14 System Menu Functions (continued)
Menu Item and Function
Edge-to-Edge
Enable or disable edge to edge
printing for PCL jobs. The available
values are:
Off*
On
Control Panel settings for this
feature may be overridden by the
settings in the printer driver.
XIE
Set the default Xerox Image
Enhancement (resolution) mode. The
available values are:
Off*
On
This item functions only when
Resolution is set to 600x600 and
Draft Mode is set to Off.
Keystrokes
1. Press Menu Up or Menu
Down until you see:
2. Press Item Up or Item Down
until you see:
3. Press Value Up or Value Down
until you see:
4. Press Enter. You will see:
5. Press Online. You will see:
1. Press Menu Up or Menu
Down until you see:
2. Press Item Up or Item Down
until you see:
3. Press Value Up or Value Down
until you see:
4. Press Enter. You will see:
5. Press Online. You will see:
Chapter 1: Configuring the Printer
Using the Menu System
Display
Menus
System Menu
System Menu
Edge-to-Edge
Edge-to-Edge =
New Value
System Menu
Edge-to-Edge
Ready
Menus
System Menu
System Menu
XIE
XIE =
New Value
System Menu
XIE
Ready
Table 1.14 Page 6 of 10
1-49