Removing - Xerox DocuPrint N2125 System Administrator Manual

Docuprint network laser printer
Hide thumbs Also See for DocuPrint N2125:
Table of Contents

Advertisement

Removing

4
Push the envelope feeder all the way into the printer until
it stops. Make sure it is seated securely.
Reconnect the printer's power cord and power on the
5
printer.
6
Check the Control Panel display. Wait until
displayed. If an error message appears, refer to Table 5.1
on page 5-4 for instructions.
7
If you have no other options to install, print a
Configuration Sheet (see page 1-103) and check it to
confirm that the option(s) have been properly installed.
1
Power off the printer and disconnect the power cord from
the power outlet and the printer.
2
Lift slightly on the envelope feeder and pull it out from
the printer.
3
Reconnect the printer's power cord and power on the
printer.
4
Check the Control Panel display. Wait until
displayed. If an error message appears, refer to Table 5.1
on page 5-4 for instructions.
Chapter 6: Installing Printer Options
Envelope Feeder
Ready
is
Ready
is
6-17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Docuprint n2125b

Table of Contents