Page Policy - Xerox DocuPrint N2125 System Administrator Manual

Using the Menu System
Table 1.14 System Menu Functions (continued)
Menu Item and Function

Page Policy

Allow the printer to automatically
select an alternate paper size and/or
type if the requested size and/or type
is not loaded.
The available values are:
Off*
Ignore Size
Ignore Type
Ignore Size/Typ
If the requested paper (size/type) is not installed, you will be prompted to load the requested paper. If the
Page Policy is Off or the Page Policy does not satisfy the request, the printer will wait indefinitely until one
of the following actions is taken:
• The job is cancelled from the Control Panel.
• From the Control Panel, Value Up or Value Down is pressed to select an alternative tray to print from
and then Enter is pressed (if Tray Sequence is not set to Off).
• A sheet of paper of any size or type is inserted into the multi bypass feeder slot.
• The proper paper (size/type) is loaded in the specified tray and the tray designation for type and size is
corrected. See "Tray Menu" (page 1-22).
If a Page Policy is set, the printer will wait a time specified by the Policy Timeout (page 1-47) before
invoking the Page Policy.
1-46 System Administrator Guide
Keystrokes
1. Press Menu Up or Menu
Down until you see:
2. Press Item Up or Item Down
until you see:
3. Press Value Up or Value Down
until you see:
4. Press Enter. You will see:
5. Press Online. You will see:
Display
Menus
System Menu
System Menu
Page Policy
Page Policy
New Value
System Menu
Page Policy
Ready
Table 1.14 Page 3 of 10
=