Xerox DocuPrint N2125 System Administrator Manual page 238

Docuprint network laser printer
Hide thumbs Also See for DocuPrint N2125:
Table of Contents

Advertisement

Additional Memory
6-42
System Administrator Guide
7
Tighten the knurled screws at the top and bottom of the
side cover.
Reconnect the printer's power cord and power on the
8
printer.
9
Check the Control Panel display. When the printer has
completed its power on diagnostics, the display should
show Ready. If an error message is displayed, refer to Table
5.1 on page 5-5 for instructions.
If you have no other options to install, print a
10
Configuration Sheet (see page 1-103) and check it to
confirm that the option(s) have been properly installed.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Docuprint n2125b

Table of Contents