Xerox DocuPrint N2125 System Administrator Manual page 69

Table 1.14 System Menu Functions (continued)
Menu Item and Function
Defaults
Sets default units. This is not changed
when a "Factory Default" is
performed.
The available values are:
• Inches (factory default for 110V
configuration)
• Millimeters (factory default for 220V
configuration)
The following defaults are affected by
changing this setting:
• System Menu>Paper Size
• PCL Menu>Form Length
• Tray Menu>MBF Size
• Tray Menu>Custom Size
• Tray Menu>Envelope Size
(if envelope feeder is installed).
Keystrokes
1. Press Menu Up or Menu
Down until you see:
2. Press Item Up or Item Down
until you see:
3. Press Value Up or Value Down
until you see:
4. Press Enter. You will see:
5. Press Online. You will see:
Chapter 1: Configuring the Printer
Using the Menu System
Display
Menus
System Menu
System Menu
Defaults
Defaults
New Value
System Menu
Defaults
Ready
Table 1.14 Page 10 of 10
=
1-53