Xerox DocuPrint N2125 System Administrator Manual page 79

Table 1.20 USB Menu Functions
Menu Item and Function
Port Enable
Enable or disable the USB port.
The available values are:
On*
Off
For the new setting to take effect,
you must restart the printer
either by invoking the Print
menu's Restart Printer item (see
page 1-103) or by powering the
printer off and on.
Port Timeout
Set the time for determining when to
end an incomplete print job and poll
the next port in the polling sequence.
The available values are:
5 - 300 seconds (30*)
This item also causes an implicit job
end such as Control D in PostScript or
<ESC> E in PCL, and invokes the
emulation functions associated with
this action (e.g., formfeed, reset, etc.).
The time changes incrementally by 1
second each time either Value Up or
Value Down is pressed. Holding
down Value Up or Value Down
causes continuous scrolling through
the values.
Keystrokes
1. Press Menu Up or Menu
Down until you see:
2. Press Item Up or Item Down
until you see:
3. Press Value Up or Value Down
until you see:
4. Press Enter. You will see:
5. Press Online. You will see:
1. Press Menu Up or Menu
Down until you see:
2. Press Item Up or Item Down
until you see:
3. Press Value Up or Value Down
until you see:
4. Press Enter. You will see:
5. Press Online. You will see:
Chapter 1: Configuring the Printer
Using the Menu System
Display
Menus
USB Menu
USB Menu
Port Enable
Port Enable
New Value
USB Menu
Port Enable
Ready
Menus
USB Menu
USB Menu
Port Timeout
Port Timeout
New Value
USB Menu
Port Timeout
Ready
Table 1.20 Page 1 of 2
=
=
1-63