Electrical Safety
iv
System Administrator Guide
• If you notice unusual noises or odors, switch off the
printer power immediately. Disconnect the power cord
from the electrical outlet. Call an authorized service
representative to correct the problem.
• If any of the following conditions occur, switch off the
printer power immediately, disconnect the power cord,
and call an authorized service representative.
— The power cord is damaged or frayed.
— Liquid is spilled into the printer.
— The printer is exposed to water.
— Any part of the printer is damaged.
The power cord is attached to the printer as a plug-in
device at the back of the printer. In the event it is
necessary to remove all electrical power from the printer,
disconnect the power cord from the power receptacle.