Demo Mode - Xerox DocuPrint N2125 System Administrator Manual

Table 1.30 Reset Menu Functions (continued)
Menu Item and Function

Demo Mode

Place the printer in the Demo Mode.
The available values are:
Yes
No*
With the printer in Demo Mode,
different factory-installed demo pages
can be printed by using the eight
Control Panel keys to select the type
of demo page and the number of
copies.
Once Demo Mode is selected, the
printer reenters this state
automatically every time the power is
cycled.
Demo Mode can be exited by
powering ON the printer while
simultaneously holding down the
Online and Enter keys.
Keystrokes
1. Press Menu Up or Menu
Down until you see:
2. Press Item Up or Item Down
until you see:
3. Press Value Up or Value Down
until you see:
4. Press Enter. You will see:
5. Press Online. You will see:
Chapter 1: Configuring the Printer
Using the Menu System
Display
Menus
Reset Menu
Reset Menu
Demo Mode
Demo Mode
Yes
Reset Menu
Demo Mode
Ready
Table 1.30 Page 2 of 4
=
1-111