Xerox DocuPrint N2125 System Administrator Manual page 172

Replacing the Laser Print Cartridge
4-4 System Administrator Guide
To replace the laser print cartridge, follow these steps:
1 If the envelope feeder is installed, power off the printer
and remove the envelope feeder.
Remove any paper from the output bin and multi bypass
2
feeder, and close the multi bypass feeder.
3 Open the front cover all the way until it stops.
Do not touch any parts inside the printer.
4 Slowly lift up and pull out the used laser print cartridge.
To prevent toner stains, place the cartridge on a
surface covered with scrap paper.
5 Remove a new laser print cartridge from its packaging and
shake the cartridge seven to eight times, as shown, to
loosen the toner.
Be sure to shake the laser print cartridge when
directed to distribute the toner inside the
cartridge. Print quality may be degraded if the
toner is not evenly distributed. If the toner has not
been properly freed by shaking the cartridge, you
may hear a noise when powering on the printer,
and the cartridge may be damaged.