Configuring Congestion Management; Configuring Sp Queuing; Configure Wrr Queuing - 3Com 4510G Configuration Manual

Configure WRR Queuing

Configuring WFQ Queuing
Configuring SP+WRR Queues

Configuring Congestion Management

Configuring SP Queuing

Configuration procedure
Follow these steps to configure SP queuing:
To do...
Enter system view
Enter
Enter
interface
interface
view
view or port
Enter port
group view
group view
Configure SP queuing
Configuration example
1) Network requirements
Configure GigabitEthernet 1/0/1 to use SP queuing.
2) Configuration procedure
# Enter system view
<Sysname> system-view
# Configure GigabitEthernet1/0/1 to use SP queuing.
[Sysname]interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] qos sp
Configure WRR Queuing
Configuration procedure
Follow these steps to configure group-based WRR queuing:
To do...
Enter system view
Task
Use the command...
system-view
interface interface-type
interface-number
port-group manual
port-group-name
qos sp
Use the command...
system-view
Optional
Optional
Optional
—
Use either command
Settings in interface view take effect
on the current interface; settings in
port group view take effect on all
ports in the port group.
Required
By default, all the ports adopt the
WRR queue scheduling algorithm,
with the weight values assigned to
queue 0 through queue 7 being 1, 2,
3, 4, 5, 9, 13, and 15.
5-5
Remarks
Remarks
Remarks
—