Mib Style Configuration; Setting The Mib Style; Displaying And Maintaining Mib - 3Com 4510G Configuration Manual

MIB Style Configuration

3Com private MIB involves two styles, 3Com compatible MIB and 3Com new MIB. In the 3Com
compatible MIB style, the device sysOID is under the 3Com's enterprise ID 25506, and the private MIB
is under the enterprise ID 2011. In the 3Com new MIB style, both the device sysOID and the private
MIB are under the 3Com's enterprise ID 25506. These two styles of MIBs implement the same
management function except for their root nodes. A device is shipped with MIB loaded and the MIB
style may vary depending on the device. To implement NMS's flexible management of the device, the
device allows you to configure MIB style, that is, you can switch between the two styles of MIBs.
However, you need to ensure that the MIB style of the device is the same as that of the NMS.

Setting the MIB Style

Follow these steps to set the MIB style:
To do...
Enter system view
Set the MIB style of the device
The modified MIB style takes effect only after you reboot the device. Therefore, you are recommended
to reboot the device after setting the MIB style to ensure that the modification of the MIB style takes
effect.

Displaying and Maintaining MIB

To do...
Display the MIB style
Use the command...
system-view
mib-style [ new | compatible ]
Use the command...
display mib-style
16-1
Remarks
—
Optional
new by default
Remarks
Available in any view