Displaying The Source Ip Address/Interface Specified For Telnet Packets - 3Com 4510G Configuration Manual

To do...
Specify source IP
address/interface for Telnet
packets
The IP address specified must be a local IP address.
When specifying the source interface for Telnet packets, make sure the interface already exists.
Before specifying the source IP address/interface for Telnet packets, make sure the route
between the interface and the Telnet server is reachable.
Displaying the source IP address/Interface Specified for Telnet
Packets
Follow these steps to display the source IP address/interface specified for Telnet packets:
To do...
Display the source IP
address/interface specified for
Telnet packets
Use the command...
telnet client source { ip
ip-address | interface
interface-type
interface-number }
Use the command...
display telnet client configuration
7-2
Remarks
Optional
By default, no source IP
address/interface is specified.
Remarks
Available in any view